|
Nexus#
Nexus#usb1:2011 Aug 15 14:23:44 Nexus %$ VDC-1 %$ %IDEHSD-2-MOUNT: USB1: online
Nexus#
Nexus#dir
25140224 Aug 12 09:57:24 2011 n5000-uk9-kickstart.5.0.3.N2.1.bin
147256572 Aug 12 10:08:08 2011 n5000-uk9.5.0.3.N2.1.bin
Usage for usb1://sup-local
378224640 bytes used
3627515904 bytes free
4005740544 bytes total
Nexus# copy usb1:n5000-uk9-kickstart.5.0.3.N2.1.bin bootflash:
Copy progress 100% 25140KB
Nexus# copy usb1:n5000-uk9.5.0.3.N2.1.bin bootflash:
Copy progress 100% 147256KB
Nexus#
Nexus#
Nexus# install all ?
<CR>
kickstart Boot-variable name
ssi Boot-variable name
system Boot-variable name
Nexus# install all kickstart bootflash:n5000-uk9-kickstart.5.0.3.N2.1.bin system bootflash:n5000-uk9.5.0.3.N2.1.bin
Verifying image bootflash:/n5000-uk9-kickstart.5.0.3.N2.1.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n5000-uk9.5.0.3.N2.1.bin for boot variable "system".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n5000-uk9.5.0.3.N2.1.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/n5000-uk9-kickstart.5.0.3.N2.1.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/n5000-uk9.5.0.3.N2.1.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset STP ISSU preupgrade check failed - Upgrade needs to be disruptive!
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------- ---------------------- ---------------------- ------------
1 system 5.0(2)N2(1) 5.0(3)N2(1) yes
1 kickstart 5.0(2)N2(1) 5.0(3)N2(1) yes
1 bios v1.8.0(10/06/2010) v3.5.0(02/03/2011) yes
1 power-seq v3.0 v3.0 no
1 uC v1.1.0.1 v1.0.0.14 no
Additional info for this installation:
--------------------------------------
Port: Ethernet1/2 in VLAN0001 is Designated. Topology change could occur during ISSU.
Upgrade needs to be disruptive!!!
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Performing runtime checks.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 1: Refreshing compact flash and upgrading bios/loader/bootrom/power-seq.
Warning: please do not remove or power off the module at this time.
Note: Power-seq upgrade needs a power-cycle to take into effect.
On success of power-seq upgrade, SWITCH OFF THE POWER to the system and then, power it up.
Note: Micro-controller upgrade needs a power-cycle to take into effect.
On success of micro-controller upgrade, SWITCH OFF THE POWER to the system and then, power it up.
[####################] 100% -- SUCCESS
Finishing the upgrade, switch will reboot in 10 seconds.
Nexus# Shutdown Ports..
writing reset reason 49,
INIT: Sending processes the TERM signal Aug 15 14:34:39 %KERN-0-
Aug 15 14:34:39 %LIBSYSMGR-3-SIGTERM_FORCE_EXIT Service "vshd" (PID 4274) is forced exit.
Nexus#
Nexus# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2011, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 3.5.0
loader: version N/A
kickstart: version 5.0(3)N2(1)
system: version 5.0(3)N2(1)
power-seq: Module 1: version v3.0
Module 3: version v2.0
uC: version v1.1.0.1
BIOS compile time: 02/03/2011
kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.3.N2.1.bin
kickstart compile time: 6/13/2011 6:00:00 [06/13/2011 13:43:33]
system image file is: bootflash:/n5000-uk9.5.0.3.N2.1.bin
system compile time: 6/13/2011 6:00:00 [06/13/2011 15:33:42]
Hardware
cisco Nexus5548 Chassis ("O2 32X10GE/Modular Supervisor")
Intel(R) Xeon(R) CPU with 8299528 kB of memory.
Processor Board ID JAF1513CCAL
Device name: Nexus
bootflash: 2007040 kB
Kernel uptime is 0 day(s), 0 hour(s), 3 minute(s), 37 second(s)
Last reset at 226877 usecs after Mon Aug 15 14:34:39 2011
Reason: Disruptive upgrade
System version: 5.0(2)N2(1)
Service:
plugin
Core Plugin, Ethernet Plugin
|
Networking 
